1700℃ High Temperature Hydrogen Tube Furnace

ZYLAB High Temperature Hydrogen Tube Furnace

Product Description:

The ZYLAB 1700℃ High Temperature Hydrogen Tube Furnace is specially designed for universities, research institutes, and industrial enterprises for sintering, melting, and analyzing metallic, non-metallic, and other compound materials under controlled atmospheres and vacuum conditions. It is ideal for hydrogen reduction sintering, high-temperature material research, battery material studies, and powder metallurgy applications.

Main Components:

The hydrogen tube furnace consists of the following key systems:

1. Sintering System – High-temperature tube with excellent insulation and uniform heating.

2. Electrical Control System – Advanced PID fuzzy self-learning control for precise temperature management.

3. Gas Inlet and Outlet System – Supports multiple gases including hydrogen, nitrogen, and air.

4. Vacuum System – Ensures high vacuum performance for controlled sintering.

5. Ignition System – Safe and complete hydrogen ignition to prevent air contamination and improve safety.

Key Features:

• Five Pre-Set Sintering Modes – Plus customizable sintering programs for experimental needs.

• Reliable & Stable Operation – User-friendly interface with multiple safety protection measures.

• Unique Ignition Device – Ensures complete hydrogen combustion and prevents external air ingress.

• Advanced PID Fuzzy Control – Maintains temperature precision within ±1°C (tube ±2°C in constant temperature).

• IoT Functionality – Remote monitoring and operation via smartphone or computer.

• Data Storage – Key sintering parameters can be stored for up to 30 days (based on 8 hours/day operation).

• Recipe Management – Store over 100 sintering recipes.

• Multiple Safety Protections – Over-temperature alarm, overcurrent protection, thermocouple failure warning.

• Network Connectivity – RJ45 interface with TCP/IP protocol, compatible with host software.

Applications of Hydrogen Tube Furnace:

• Hydrogen Reduction Sintering – For metals, ceramics, and composite powders.

• High-Temperature Material Research – Ideal for metallic and non-metallic compound studies.

• Battery Materials – Sintering and heat treatment for electrodes in lithium and solid-state batteries.

• Powder Metallurgy – Sintering and alloying of metal powders.

• Analytical Experiments – Vacuum or atmosphere-controlled material analysis.

Technical Parameters:

Model	T17-100
Power Supply	AC380V 50Hz
Rated Power	8KW
Furnace Tube	Alumina tube Φ100×1200mm
Heating Zone Length	460mm, single-zone dual-control
Recommended Heating Rate	10℃/min (≤20℃/min)
Working Temperature	≤1650℃
Heating Element	High-purity silicon carbide rods
Furnace Lining	High-purity polycrystalline fiber composite insulation
Furnace Chamber Mode	Fully enclosed heating system
Sealing	Stainless steel vacuum flange
Temperature Sensor	S-type thermocouple
Sintering Data Storage	Automatic recording, exportable reports
Sintering Modes	Normal air sintering, vacuum or gas-assisted sintering
Protection System	Over-temperature alarm, overcurrent protection, thermocouple fault alarm
Gas Supply System	Three Gas Flow Meters: Nitrogen: 10 L/min Hydrogen: 300 ml/min Air: 5 ml/min Vacuum-Grade Stainless Steel Flange with temperature probe port
Vacuum System	Vacuum Pump: Direct-drive two-stage rotary vane Pumping Speed: 10 m³/h System Vacuum: ≥ -95 KPa Vacuum Valve: Electromagnetic
Hydrogen Safety Ignition System	Ignition Mode: Dynamic detection ignition with flame-out alarm Sintering Modes: Multiple safe hydrogen sintering programs available
Saturated Vapor System	Heating Power: Preheating 200W, Main heating 800W Temperature Range: Room temperature – 3500°C Peristaltic Pump Control: 0.01 – 10 ml/min Vapor Output: 0.012 – 17 L/min
Control System		Embedded OS with Chinese/English interface, 7-inch true color touchscreen. Pressure protection control. Dynamic sintering curve setup, multiple pre-stored curves. Scheduled sintering for unattended operation. Real-time display of power, voltage, and sintering data; exportable for paperless record keeping. Remote monitoring and control. Temperature calibration for non-linear corrections. Optional 485 interface supports MODBUS for remote computer data acquisition.
Temperature Accuracy	±1°C
Weight	Approx. 370 kg
Optional Corrosive Gas Pre-Heater		Made of 316L stainless steel; preheats various gases including weakly corrosive gases; maximum temperature 600°C
Warranty & Support	18 months(not including consumable parts, such as heating elements, thermocouple), lifetime support.

Click to See More Content

All About Hydrogen Reduction Furnace: An Essential Tool for Advanced Material Processing

For More Options on Hydrogen Reduction Furnace

Click here [Hydrogen Reduction Furnace]

For More Options on High Temperature Furnaces

Click here [High Temperature Furnaces Collection]